Main Features：
1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished.
2. Adopt the auto control system on auto weighing and feeding, auto heeting and cooling.
3. Vacuum system mainly includes vacuum storage tank, vacuum cooling tank and efficient water ring vacuum pump and other components.
4 .The machine uses the heating way of top intake, bottom exhaust and cooling way of water spray system.
5. Using high-quality steel and then are welded and heat-treated, sand blasted, shot blasted, the machine is with high strength, no deformation. Block density can reach 6-40kg / m, with high speed, uniform adhesion, low moisture content, the small deformation.
6. Machine cavity is made of stainless steel plate or stainless steel wedge grid structure, with features of energy efficient, easy to disassemble to clean, easy to mold, sheet and good bonding.
7. The machine uses translation mode to open and close the door,with features of nice, fast and efficient way and safe and reliable operation.Eject the block out while the door opened. It is easy to adjust when the mold clamping gap and improve the air tightness of the machine.
8. The machine is equipped with automatic transmission and automatic electronic weighing equipment, printing equipment
9. The machine is also suitable for lost mold EPS block. 10. The machine is designed by South korean engineer, all of the valves are imported from South Korea.
Technical parameters：
| No. | Item | Type/Unit | EPSBM6000V/H | EPSBM8000V/H | |
|---|---|---|---|---|---|
| 1 | Mould Size | mm | 6120×1230×1050 | 8110×1240×1040 | |
| 2 | Mould Volume | m3 | 7.96 | 10.46 | |
| 3 | Product Density/Specific Gravity | kg/m3 | 6-40 | 6-40 | |
| 4 | Production Capacity | block/h | 4-12 | 3-11 | |
| 5 | Steam Pressure | Mpa | 0.6 | 0.6 | |
| 6 | Steam Inlet DN | mm | 150 | 150 | |
| 7 | Compressed-Air Inlet DN | mm | 50 | 65 | |
| 8 | Power Supply | Power | kw | 30 | 30 |
| Voltage | v | 380 | 380 | ||
| 9 | Control Mode | Automatic | Automatic | ||
| 10 | Structural Features | Hydraulic Sliding-door Vacuum Cooling | Hydraulic Sliding-door Vacuum Cooling | ||
| 11 | Control System | PLC with Touch Screen | PLC with Touch Screen | ||
| 12 | Max. Outer Dimension | Mm | 14000×4000×3000 | 16000×4000×3000 | |
| 13 | Machine Net Weight | Tons | 17 | 20 | |
| 14 | Automatic Conveyer | Supplied | Supplied | ||
| 15 | Electronic Scale | Supplied | Supplied | ||
| 16 | Printer | Optional | Optional | ||
Reviews
There are no reviews yet.