Working Principle
The portable crushing plant is usually powered by an external power source. The raw materials are uniformly sent to the jaw crusher or impact crusher by the vibrating feeder for coarse crushing. Next, the coarse crushed materials are sent to the cone crusher or impact crusher by the belt conveyor for further crushing. After that, the fine crushed materials are sent to the vibrating screen where materials meeting size requirement would be screened as finished products while unqualified ones sent back to the impact crusher or cone crusher for reprocessing, forming a closed circuit and multiple cycles. The granularity of finished products can be decided according to the needs of users.
Product Parameters
| model | Standard Wiring Equipment for Soft and Hard Rock | |||||||||||||||||||
| Aggregate Properties | Product Line Model | Model 1 Integrated Mobile Equipment (4 models) | Model 2 Coarse Crushing Mobile Equipment (5 models) | Model 3 Medium Crushing Mobile Equipment (8 models) | Model 4 Screening Mobile Equipment (3 models) | |||||||||||||||
| Code of Crusher 1 (integrated equipment) | Code of Crusher 2 (coarse crushing) | Code of Crusher 3 (single seat for medium crushing) | Code of Crusher 4 (double seats for medium crushing) | Code of Crusher 5 (screening) | ||||||||||||||||
| K3T100-4 | K3I100-4 | K3T150-4 | K3E760-1 | K3C100-1 | K3C110-1 | K3CI1213-1C | K3CI1315-1C | K3H300-1 | K3CI1213-1 | K3CI1315-1 | K3V9026-1 | K3H300D-2 | K3H300V-2 | K3CI1213V-2 | K3CI1315V-2 | K3S1860-1 | K3S2160-1 | K3S2460-1 | ||
| Hard Rock (feeding≤430mm) | K3YC-100T | ★ | ||||||||||||||||||
| Soft Rock (feeding≤430mm) | K3RC-100T | ★ | ||||||||||||||||||
| Hard Rock (feeding≤430mm) | K3YC-150T | ★ | ||||||||||||||||||
| Soft Rock (feeding≤430mm) | K3RC-150T | |||||||||||||||||||
| Hard Rock (feeding≤530mm) | K3YC-200T | ① | + | + | + | |||||||||||||||
| K3YV-200T | ① | + | + | + | + | |||||||||||||||
| Soft Rock (feeding≤530mm) | K3RC-200T | ① | + | + | + | |||||||||||||||
| K3RV-200T | ① | + | + | + | + | |||||||||||||||
| Soft Rock for Construction Waste (Feeding≤400mm) | K3RW-200T | + | + | |||||||||||||||||
| Hard Rock (feeding≤630mm) | K3YC-300T | + | + | + | + | |||||||||||||||
| K3YV-300T | + | + | + | + | ++ | |||||||||||||||
| Soft Rock (feeding≤630mm) | K3RC-300T | + | + | + | ||||||||||||||||
| K3RV-300T | + | + | ++ | |||||||||||||||||
| Soft Rock for Construction Waste (Feeding≤400mm) | K3RW-300T | + | + | |||||||||||||||||
| 1. The capacity listed in this table is calculated according to the pile specific gravity of 1.6t/m3; it is affected by many factors, such as the nature of the material, the composition of the particle size, the working conditions such as feeding and discharging, the moisture content of mud, the loose density and the fragility, etc., so the data in the table will change depending on the specific situation. 2. In the table, ★, + indicates the mobile plant model corresponding to the corresponding capacity level, + + indicates that the number of times the model appears is 2; in the table, ① indicates that it can be used as an alternative to K3C100-1 mobile crusher. 3. The technical parameters involved in this paper are for reference only. Please contact the R & D Cente |
||||||||||||||||||||
Reviews
There are no reviews yet.